Filter
Top Products
11
Controls –continued
Power Saving Mode
The monitor will be driven into “Power Saving” mode by the control signal from the display
controller, as indicated by the amber-color power LED.
The power saving states will be kept until a control signal has been detected or the key-
board or mouse is activated. The recovery time from Active OFF state back to ON state is
around 5 seconds.
DDC (Display Data Channel)
To make your installation easier, the monitor is able to Plug and Play with your system if
your system also supports DDC protocol. The DDC (Display Data Channel) is a communication
protocol through which the monitor automatically informs the host system about its
capabilities, for example, supported resolutions and corresponding timing. The monitor
supports DDC2B standard.
etatSetatS
etatS
etatSetatS
rewoPrewoP
rewoP
rewoPrewoP
noitpmusnoCnoitpmusnoC
noitpmusnoC
noitpmusnoCnoitpmusnoC
thgiLDELthgiLDEL
thgiLDEL
thgiLDELthgiLDEL
NOlamroNneerG
FFOevitcAW2<rebmA
LCD5V
etatSetatS
etatS
etatSetatS
rewoPrewoP
rewoP
rewoPrewoP
noitpmusnoCnoitpmusnoC
noitpmusnoC
noitpmusnoCnoitpmusnoC
thgiLDELthgiLDEL
thgiLDEL
thgiLDELthgiLDEL
NOlamroNneerG
FFOevitcAW3<rebmA
LCD7V/LCD9V
ASLCDmanual022803.p65 2/28/03, 9:44 AM11