Filter
Top Products
English-14
Basic Operation
Preparations
For displays
•Remote control enclosed with the display
For projectors
•Remote control enclosed with the projector
•Dedicated remote control for operating the product
Display remote control
1
POWER ON button
Turn on the power of the display.
2
STANDBY button
Turn off the power of the display.
3
SWITCH INPUT button (OPTION)
Switch the video input of the display to the product.
4
SWITCH AUDIO INPUT button (AUDIO INPUT)
Switch the audio input of the display. Select [OPTION] when outputting
the audio of the product.
5
OPTION MENU button
Used for the menu operations of the product.
6
NUMBER button, PLAY button
Use d for the inpu t of nu mbe rs. Whe n play in g co ntents
w it h th e m ed ia p lay er, th e f un ct io ns a re as f ol low s.
1: Back, 2: Playback, 3: Skip, 5: Stop, 6: Pause.
7
MENU button
Turn the display OSD screen ON/OFF.
8
UP button (
)
Move to the setting at the top of the menu screen.
9
DOWN button (
)
Move to the setting at the bottom of the menu screen.
0
MINUS button ( - )
Move to the setting on the left of the menu screen.
Delete the number in front when inputting numbers.
!
PLUS button ( + )
Move to the setting on the right of the menu screen.
@
SET button
Confirm the setting in the menu screen.
#
EXIT button
Return to the previous menu screen.
NOTE:
• The remote control enclosed with the display differs depending on the model. Use the OPTION button for menu
operations of the product if there is no OPTION MENU button.
• See the manual of the display for button operations other than the above.