Niles Audio SI-275 Car Amplifier User Manual


 
14
INSTALLATION
AC Power Plug
STEP
Plug the female IEC socket of the sup-
plied AC cord into the IEC receptacle
on the rear of the amplifier.
Plug the two-prong plug into a
correctly grounded 120V 60 Hz
wall outlet.
CAUTION! Typically the preamp/
receiver’s switched outlet is not rated
for a power amplifier.
DESCRIPTION
Just like a computer or printer, the SI-275
has an AC cord which unplugs either at the
amp or at the wall for your convenience.
If you use a grounded power strip, surge
suppressor or extension cord, verify that
proper ground is maintained.
The SI-275 draws a maximum of approxi-
mately 700 watts from an AC wall outlet.
Use the auto turn on circuit instead.