8
Connecting the C-733
If you connect another component from the Onkyo Separate Collection to the C-733 with the supplied and audio
cables, you can use the following system functions. cables are special cables solely for use with Onkyo products.
• Simply connecting an cable will not enable the system functions. You must make an analog audio connection as
well. See page 9 for more information.
• See the instruction manual supplied with each component for more information about the system functions.
About the System Functions
Connecting components from the Onkyo Separate Collection.
See the amplifier’s instruction manual.
Auto Power On
When you turn on the power or start playback on the C-733, the amplifier will turn on automatically. (The ampli-
fier’s POWER switch must be set to ON for this to work.)
Direct Change
When playback is started on the C-733, the amplifier will automatically select the CD input.
Remote Control Operation
You can control the C-733 by using the A-933’s remote con-
troller.
See page 7 for more information.
Program Timer
With an Onkyo tuner, you can program its timer to automati-
cally start playback or recording at a specific time.
See the tuner’s instruction manual for
more information.
One-touch CD Dubbing
If your system comprises a CDR, MD recorder, or cassette
deck, you can dub an entire CD simply with one press of a but-
ton.
Dubbing Individual Tracks
If your system comprises an MD recorder or CDR, you can dub
your favorite CD tracks individually with one press of a button.
See your MD recorder’s, CDR’s, or
cassette deck’s instruction manual for
more information.
Synchro Recording
When recording on a CDR, MD recorder, or casssette deck,
you can start the recording process simply by starting playback
on the C-733.
DLA Link
DLA Link (Digital Rec Level Adjustment) scans the CD to be
dubbed and automatically sets the recording level on the CDR
or MD recorder.