Filter
Top Products
38
Using USB interface (CR-525UKD only)—Continued
This section explains how to play music files on a USB mass storage device.
Connect a USB mass storage device as shown below.
Display during Stop
Note:
In general, playback of USB mass storage device music
files is a repeating playback. When all music files have been
played, playback will repeat from the top music file in the
folder organization. The type of repeat playback can be
selected (see page 39).
Selecting Music files
To return to the beginning of the music
file currently playing, press the Previ-
ous [ ] button.
Press the Previous [ ] button
repeatedly to select previous file.
• While playback is stopped, pressing the Previous
[ ] button will select the previous file.
Press the Next [ ] button repeatedly to select next
file.
Selecting Music files in other folders
1 Press the [FOLDER] button to display the current
folder name.
The folder name will flash.
2 To select the previous folder, press the Previous
[ ] button.
To select the next folder, press the Next [ ]
button.
3 Press the [FOLDER] button to display the file
name.
4 Use the Previous [ ] and Next [ ] buttons to
select a file.
Notes:
• Do not connect the CD receiver’s USB port to a USB port
on your computer. Music on your computer cannot be
played through the CD receiver in this way.
• Operation with all USB mass storage devices including
the ability to power them is not guaranteed.
• Do not connect your USB mass storage device via a USB
hub. The USB mass storage device must be connected
directly to the CD receiver’s USB port.
• If the USB mass storage device contains a lot of data, the
CD receiver make take a while to read it.
Playing Music Files on a USB Mass Storage Device
FOLDER
INPUT
/
/
USB mass storage device
1
Remote
controller
Use the INPUT [ ]/[ ] buttons
to select “USB”.
• When no USB mass storage device is
connected, “No USB” will be dis-
played.
• When there is no MP3 or WMA file
in the USB mass storage device, “No
File” will be displayed.
2
To start playback, press the Play
[ ] button.
Playback will begin with the top file in
the folder organization (see page 37,
File #1).
To stop playback:
Press the Stop [ ] button.
To pause playback:
Press the Pause [ ] button. The Pause
indicator appears. To resume play-
back, press the Pause [ ] button again.
Total number of folders
Total number of files
REPEAT indicatorUSB indicator
Remote
controller