Onkyo TX-SR8260 Car Stereo System User Manual


 
31
Connecting the AV receiver
—Continued
This section explains how to connect a VCR for
recording from a TV or another VCR.
Video Connections
Use an S-Video cable to connect the AV receiver’s
S VIDEO 1 OUT jack to an S-Video input on the
recording VCR. Use another S-Video cable to connect
the AV receiver’s S VIDEO 3 IN jack to an S-Video
output on your TV or playback VCR, as shown.
OR
Use a composite video cable to connect the AV
receiver’s V VIDEO 1 OUT jack to a composite video
input on the recording VCR. Use another composite
video cable to connect the AV receiver’s V VIDEO 3
IN jack to a composite video output on your TV or
playback VCR, as shown.
Audio Connections
Use an analog audio cable to connect the AV receiver’s
VIDEO 1 OUT L/R jacks to an audio input on the
recording VCR.
Use an analog audio cable to connect the AV receiver’s
VIDEO 3 IN L/R jacks to an audio output on your TV
or playback VCR.
Playback from the Recording VCR
To play back a video in the recording VCR via the AV
receiver:
Use an S-Video cable to connect the AV receiver’s S
VIDEO 1 IN jack to an S-Video output on the record-
ing VCR.
OR
Use a composite video cable to connect the AV
receiver’s V VIDEO 1 IN jack to a composite video
output on the recording VCR. And use an analog audio
cable to connect the AV receiver’s VIDEO 1 IN L/R
jacks to an audio output on the recording VCR.
Notes:
The AV receiver must be turned on for recording.
Recording is not possible while it’s in Standby mode.
If you want to record directly from your TV or play-
back VCR to the recording VCR without going
through the AV receiver, connect the TV/VCR’s audio
and video outputs directly to the recording VCR’s
audio and video inputs. See the manuals supplied with
your TV and VCR for details.
•Video signals connected to composite video inputs
can only be recorded via composite video outputs. If
your TV/VCR is connected to a composite video
input, the recording VCR must be connected to a com-
posite video output. Similarly, video signals con-
nected to S-Video inputs can only be recorded via
S-Video outputs. If your TV/VCR is connected to an
S-Video input, the recording VCR must be connected
to an S-Video output.
Connecting a VCR for Recording
VIDEO
OUT
S VIDEO
OUT
LR
AUDIO
OUTPUT
LR
S VIDEO IN
VIDEO IN
AUDIO
INPUT
LR
S VIDEO OUT
VIDEO OUT
AUDIO
OUTPUT
L
R
IN
IN
VIDEO 3
OUT
OUT
VIDEO 1
IN
IN
:
:
TV
VCR (recording)
Connect one
or the other
Connect one or
the other
For recording
For playback
VCR, etc.or