Filter
Top Products
60
Basic Operation
—Continued
See “About the Listening Modes” on page 62 for
detailed information about the listening modes.
Selecting on the AV receiver
■
[PURE AUDIO] button (not American
TX-SR602)
This button selects the Pure Audio listening mode.
While this mode is selected, the AV receiver outputs
no video signals and its display is turned off.
■
[STEREO] button
This button selects the Stereo listening mode.
■
LISTENING MODE [ ] [ ] buttons
These buttons select all the listening modes that can
be used with the current input source.
Modes can be selected in the following order,
depending on the input signal format:
Pure Audio
➔
Direct
➔
Mono
➔
Surround (e.g.,
PLIIx, Neo:6, Dolby D EX, DTS/DTS 96/24, DTS-
ES, and so on)
➔
Onkyo original DSP
Selecting with the Remote Controller
■
[SURR] button
This button selects the Dolby Digital, Pro Logic IIx,
Neo:6, DTS, and other listening modes.
■
[All ST] button
This button selects the All Ch Stereo listening mode.
■
[THX] button (TX-SR702/702E only)
This button selects the THX listening modes.
■
[STEREO] button
This button selects the Stereo listening mode.
■
[PURE A] button (not American TX-SR602)
This button selects the Pure Audio listening mode.
While this mode is selected, the AV receiver outputs
no video signals and its display is turned off.
■
[DIRECT] button
This button selects the Direct listening mode.
■
[ DSP] & [DSP ] buttons
These buttons select the Onkyo original DSP modes.
Selecting Listening Modes
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).
• Listening mode availability depends on the
format of the current input signal.
PURE AUDIO
STEREO
LISTENING MODE
SURR
PURE A
PURE A
DIRECT
DSP
DSP
STEREO
ALL ST
THX
SURR
DIRECT
DSP
DSP
STEREO
ALL ST
RC-588M
RC-590M/591M
(not
RC-590M)