Filter
Top Products
© 2009 Directed Electronics. All rights reserved. 6
SPECIFICATIONS
Amplifier Section HCCA25001 HCCA50001
Power Output 4Ω (Watts
rms) *
750 x 1 1500 x 1
Power Output 2Ω (Watts
rms) **
1500 x 1 3000 x 1
Power Output 1Ω (Watts
rms)
2500 x 1 5000 x 1
Amplifier Efficiency
> 60% into 1Ω load at
max. power
> 60% into 1Ω load at
max. power
Signal to Noise ratio at
rated output power and
lowest impedance
>100 dB >100 dB
Externally Bridgeable No No
Remote Gain Function yes (RGC2 supplied) yes (RGC2 supplied)
Distortion at Rated Power 0.2% THD+N 0.2% THD+N
Frequency Response
20Hz to 300Hz
±2.5dB
20Hz to 300Hz
±2.5dB
Linear Bandwidth
20Hz to 300Hz
±3dB
20Hz to 300Hz
±3dB
Damping Factor > 100 > 100
Input Sensitivity Selection
Switch
Yes Yes
Input Sensitivity 200mV-4V / 400mV-8V 200mV-4V / 400mv-8V
Supply Voltage Range 9 to 16V 9 to 16V
Amplifier Section HCCA25001 HCCA50001
Protection
thermal,
DC offset,
short protection,
under-voltage,
over-voltage
thermal,
DC offset,
short protection,
under-voltage,
over-voltage
Terminal Wire Gauge
Power 0/1 AWG,
Remote 12-16 AWG,
Ground 0/1AWG,
Speaker 8 AWG
Power 0/1 AWG,
Remote 12-16 AWG,
Ground 0/1AWG,
Speaker 8 AWG
Input Impedance 20 kΩ 20 kΩ
Fuse Size 250 Amp 500 Amp
Dimensions (L x W x H) 19.75" x 10.3" x 2.5 " 24.75" x 10.3" x 2.5"
Crossover Section
High Pass
Crossover
Continuously variable
(20-200Hz)
Continuously variable
(20-200Hz)
Low Pass
Crossover
Continuously variable
(20-300Hz)
Continuously variable
(20-300Hz)
Intelli-Q 0–10dB boost 0–10dB boost
* Continuous 4Ω load 20Hz to 200Hz, < 1% THD, with input voltage at 14.4VDC.
** Continuous 2Ω load 20Hz to 200Hz, < 1% THD, with input voltage at 14.4VDC.