Filter
Top Products
40
41
Main menu (continued)
Sub menu Settings Description
IN MONITOR DISPLAY
OFF
ON
Enables IMD display.
POSITION
TOP
BOTTOM
Selects the position for the IMD display.
<TOP> Top
<BOTTOM> Bottom
CHAR. COLOR
CMD
WHITE
BLUE
GREEN
YELLOW
CYAN
RED
GRAY
MAGENTA
Selects IMD font color.
<CMD> Color specified by command
*
3
<WHITE> White
<BLUE> Blue
<GREEN> Green
<YELLOW> Yellow
<CYAN> Cyan
<RED> Red
<GRAY> Gray
<MAGENTA> Magenta
*
3
When colors selected by commands are set to “OFF,” the IMD character string is not displayed.
CONTROL
The underlined values are factory preset setting values.
Sub menu Settings Description
CONTROL
LOCAL
REMOTE
Selects operation. (with control lock)
<LOCAL> Front panel operation is enabled (including controls that use the GPI
function)
<REMOTE> Remote operation enabled (controls using RS-232C or RS-485). (Front
panel operation is locked)
• Power On/Off, VOLUME operations, GPI control and menu display are
available when the lock is engaged.
• Only “CONTROL/LOCAL ENABLE” menu items are available when the
lock is engaged.
• The rotary knob is disabled and set values cannot be changed when the
lock is engaged.
• The “LOCAL ENABLE” setting determines operations in lock mode.
• The key icon appears in the operation status display, menu display (main
menu, FUNCTION menu, INPUT SELECT menu), picture adjustment
menu display, and function display screens when the lock is engaged.
MENUEXIT
RETURN
RETURNSEL. ENTER
[MARKER]
MARKER
16:9
4:3
BACK
CENTER
CROSS
COLOR
GPI MARKER1
GPI MARKER2
OFF
4:3
OFF
NORMAL
OFF
OFF
WHITE
95%(16:9)
95%(16:9)
Key icon
LOCAL ENABLE
*
1
DISABLE
INPUT
FUNCTION
INPUT+FUNC.
Selects whether to enable or disable INPUT SELECT and FUNCTION button
operations when “REMOTE” is selected under “CONTROL.”
<DISABLE> Disables INPUT SELECT and FUNCTION button operations.
<INPUT> Enables INPUT SELECT button operations.
<FUNCTION> Enables FUNCTION button operations.
<INPUT+FUNC.> Enables INPUT SELECT and FUNCTION button operations.
PROTOCOL VER.
*
2
V3.1
V4.0
Selects version of the TSL protocol.
RS-485 ID SETUP 0-126 Sets the unit ID number to use in RS-485 communication.
RS-485 STX&ETX OFF
ON
Select RS-485 interface command format (→page 46).
<OFF> STX and ETX need not be placed.
<ON> STX and ETX must be placed.
*
1
Only available when “REMOTE” is selected under “CONTROL.”
*
2
The monitor supports version 3.1 and 4.0 of the TSL UMD PROTOCOL provided by Television System LTD.
HOURS METER
Sub menu Settings Description
OPERATION
XXXXXXh
*
1
Displays the number of hours it has been on.
LCD
XXXXXXh
*
1
Displays the number of hours that the backlight has been on.
*
1
“XXXXXX” indicates up to 262800 hours (approx. 30 years). “OVER” is indicated when the number of hours is 262800 or higher.