Filter
Top Products
20
CQ-C8803N
Radio
Band
Frequency
Preset Number
Radio Mode Display
Lights when LOCAL is
activated. (a page 20)
Lights while receiving an FM stereo signal.
Lights when MONO is activated. (a page 20)
Radio Menu Display
In the AM mode, only AUDIO FILTER and LOCAL can be
selected.
1
Press [MENU] to
display the menu
display.
For using the remote
control, hold down
[SEL](MENU) for 2
sec. or more.
2
Press [}] or [{] to select a mode to be
adjusted.
3
Press [BAND]
(SET) to adjust.
4
Press [MENU] to
confirm the
adjustment.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
MONO (Monaural)
Noise reduction when the signal strength decreases
: Receiving in stereo (default)
: Receiving in mono and reducing the noise level
LOCAL
Setting when searching for a station
: Searching even for a relatively low-intensity
radio wave station (default)
: Searching only for a high-intensity radio wave
station
AUDIO FILTER (IF)
IF filter setting for noise suppression
: Wide range
: Middle range (default)
: Narrow range
PRESET
You can select 6 or 18 stations for FM presetting with the
use of APM.
:
Presets 6 stations to FM1 to FM3 respectively, that is, 18
stations in total at the same time. This function is useful
for presetting more than 6 stations. (default)
:
Presets 6 stations with good reception to the selected
band from FM1 to FM3. This function is useful for preset-
ting stations in different areas in different bands.
D·M SET
(a page 21)
DISP
PTY
DISP
PTY