Filter
Top Products
33
34
CQ-VD7003U
English
Settings (continued)
RADIOINPUT/OUTPUTDVD
AUDIO
SCREENUSER
DIMMER
Adjusting the brightness
: automatically adjusted according to
ambient light intensity.
default:
AUTO
4321
AUTO
PICTURE
Display appearance
: decreases the contrast between black and white
: increases the contrast between black and white
[
]
(Adjust the image contrast)
CONTRAST
: darkens
: lightens
[
]
(Adjust the image brightness)
BRIGHT
: lightens the depth of color on the display
: deepens the depth of color on the display
[
]
(Adjust the image color depth)
COLOR
: emphasizes red in the color image
: emphasizes green in the color image
[
]
(Adjust the image tone or tint)
TINT
RADIOINPUT/OUTPUTDVDAUDIO
SCREEN
USER
Darker
Brighter
GRAPHIC-EQ
(Graphic-equalizer)
Graphic-equalizer
Six EQ presets are already provided at shipment in this
unit. To
recall a preset memory, select the correspon-
ding preset buttons
[1] to [6].
: (Flat) flat frequency response
: (Rock) speedy and heavy sound
: (Pop) wide-ranged and deep sound
: (Vocal) clear sound
: (Jazz) jazz-specific deep sound
: (Club) club and disco-specific sound
You may set your own EQ or modify factory preset-
tings in each memory button by following the instruc-
tions below:
Adjusting level of each preset
The level of each of the 7 frequency bands can be
adjusted.
q
Select the preset number that you prefer to adjust.
w
Touch/press
/
[
{
][
}
]
to adjust each fre-
quency.
e
Touch/press the same preset number for more than
2 seconds.
Frequency band
(Hz)
Adjustment range: –12 dB to +12 dB (in 2 dB steps)
default: ± 0 dB for each band
Note:
¡
The new level adjustment will overwrite the previous
level adjustment.
¡
For resuming the factory settings, touch and hold
(INIT (initialize))
for more than 2 seconds
.
16k6k3k1k40016060
6
5
4
3
2
1
(Display)
SOUND SETUP
Sound Set Up
: No GEQ or CS Auto setting
: Goes to GEQ setting
: Goes to CS Auto setting
default:
THROUGH
CS Auto
GEQ
THROUGH
(Sound effect setting)
SOUND EFFECT