Filter
Top Products
CX-D3000U
25
(Example: “1. 1”)
<Audio Output Level>
Select
Audio Output Level
1. 1
2. 2
3. 3
4. Return
1. Pan&Scan:Plays in Pan & Scan mode
2. Letterbox: Plays in Letter Box mode
3. Return: The display returns to “Main Menu”.
1. ON: When power is turned on, On-Screen Display messages such
as “Play” and “Pause” will always be displayed on the screen
for 5 seconds.
2. OFF: When power is turned on, On-Screen Display messages such
as “Play” and “Pause” will not be displayed on the screen.
3. Return: The display returns to “Main Menu”.
1. Minimum: Most compressed mode: TV broad-
casts, etc.
2. Standard: Mode recommended by software
creators for listening at low volumes.
3. OFF:
Does not compress the dynamic range.
4. Return: The display returns to “Main Menu”.
Note:
≥ If “Pan & Scan” or “Letterbox” is already set in the
software, this setting is ignored.
Note:
≥ When it is difficult to hear comparatively small sound
(such as movie dialogue), setting “Minimum” will
make those sounds easier to hear.
3
Select each item.
4
Finish the setting.
1. 1: Minimum Level
2. 2: Middle level
3. 3: Maximum level
4. Return: The display returns to “Main Menu”.
Note:
≥ We recommend that you select the default when you
use this player in the system configurations (page
40–43), and adjust the volume control on the display
unit or stereo unit concerned to this player.
See the display unit operating manual for details.
≥ The setting is completed.
E
N
G
L
I
S
H
16
Note:
≥ To apply changes to settings, be sure to
press [0] at the end.
≥ After the user settings have been changed
and entered, the player returns to the start of
the disc and begins playback.
≥ When the disc has predetermined language
or other settings, the user settings are not
reflected.