Filter
Top Products
28
CQ-C1300U
CQ-C1300U
29
Audio Settings
[VOLUME "]: Up
[VOLUME #]: Down
Note:
≥ Press [DISP] (display) to return to the
regular mode.
≥ If no operation takes place for more than
7 seconds in audio setting (2 seconds in
the volume setting), the display returns to
the regular mode.
≥ The volume can also be adjusted directly
using [VOLUME] on the main unit.
(page 17)
≥ The effect of SQ can be adjusted by
bass/treble adjustment. For some music
sources or at some volume levels, the
sound quality is not desirable because
sound is distorted, or the effect is not
suffi cient because the BAS effect is limited.
In such cases, turn down the sound volume
or readjust the bass/treble setting.
≥ Please refer to page 17 for information on
SQ setting.
1 Press [VOLUME]
(SEL: select).
Volume
Default:18
Setting range: 0 to 40
Bass/Treble
You can adjust the bass and treble sound.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: j12 dB to i12 dB (by 2 dB)
Balance/Fader
You can adjust the sound balance among the
front, rear, right and left speakers.
Default: BAL (balance) CNT (center)
FAD (fader) CNT (center)
Setting range: 15 levels each
2 Turn [VOLUME].
(Press [VOL "] or [VOL #]
on the remote control unit.)
[VOLUME "]: Increased
[VOLUME #]: Decreased
[VOLUME "]: Increased
[VOLUME #]: Decreased
[VOLUME "]: Right enhanced
[VOLUME #]: Left enhanced
[VOLUME "]: Front enhanced
[VOLUME #]: Rear enhanced
E
N
G
L
I
S
H
15
E
N
G
L
I
S
H
16