Filter
Top Products
XM Satellite Radio control
Preparation:
Connect the optional XM Satellite Radio Tuner
(XMD1000) with optional Digital Adapter Cable.
XM Satellite Radio
You can connect the optional XM Satellite Radio
Tuner (XMD1000) with optional Digital Adapter Cable
(XMDPAN110). For details, refer to the operating
instructions for the XM Satellite Radio Tuner.
Toll free number
XM Satellite Radio Tuner P/N: XMD1000
Call 1-800-XM-RADIO (967-2346)
Extension cord P/N: XMDPAN110
Call 1-800-942-TERK (8375)
About XM
The direct satellite-to-tuner broadcasting technology
is used to provide listeners with crystal-clear sound
smoothly from coast to coast. XM is over 130 channels
of sheer variety: digital-quality music, news, sports,
comedy, traffi c & weather, talk, children’s programs, and
more.
The XM name and related logos are trademarks of XM
Satellite Radio Inc.
Getting started
You must sign up to become an XM Satellite Radio
subscriber. After checking your XM Satellite Radio ID,
sign up on XM’s website or call them.
1
Check XM Satellite Radio ID.
XM Satellite Radio ID
XMD 1000
L/C
1144XXXXXX
XM RADIO ID : XXXXXXXX
Write down the ID indicated on the lower right of
your XM Satellite Radio Tuner (XMD1000).
Check the ID shown by tuning your XM radio to
channel 0.
2
Activate XM Satellite Radio. Select
either of the following to sign up.
Web site: http://www.xmradio.com/activation
Phone number: 1-800-852-9696
Switch to XM Satellite Radio
Select [XM] on the Audiovisual
source operation screen.
(
Operating
Instructions)
The XM operation screen is displayed.
XM operation screen
Select a channel
Press .
When the category setting is on
Channels within the selected category can be
switched.
When the category setting is off
Channels can be switched from among all
channels in all categories.
Category setting ( page 10)
Note:
Press and hold or to scan the channels.
Release to stop scanning channels.
Displays the XM
Setup screen
Channel
Channel information
Direct channel selection
Category selection
Preset channels
Indicates XM Satellite
Radio Tuner is ready.
List selection
Select a channel directly
Select the channel by directly entering the channel
number.
1
Select [Number].
2
Enter the channel number and select
[Enter].
Switches to the selected channel.
Select [Ret] to delete the entered numbers.
Note:
If the selected channel is in a category that does not
match the current category selection, the category
also switches.
If you have not signed up for the selected channel, no
sound can be heard from the unit.
(“INVALID CHANNEL” is displayed.)
Channels which can be selected are in the range of 0
to 255 channel.
English
English
8
9
98