Filter
Top Products
0
0
0
1/2
SOUND
NORMAL
NORMALIZE
OFF
TREBLE
BALANCE
BASS
0
MID
SURROUND
MAIN
AUDIO OUT (PIP)
35
SOUND Adjustment
1
Press to display the SOUND menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Press to exit from adjust mode.
2
Select to adjust each item.
While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION
(
) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
NORMALIZE
Normalization)
3
SDI SOUND OUTPUT
This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-
FB11DHD) is installed to the unit.
2/2
SOUND OUT
LEFT CHANNEL
RIGHT CHANNEL
CHANNEL 1
CHANNEL 1
OFF
LEVEL METER
OFF
SDI SOUND OUTPUT
Notes:
• This menu is available only when selecting a
slot that HD-SDI Terminal Board with audio
(TY-FB10HD) or Dual Link HD-SDI Terminal
Board (TY-FB11DHD)is installed.
• This menu is unavailable when 2-picture
display mode is active.
Item Details
LEFT CHANNEL
CHANNEL 1 to CHANNEL 16
Selects left audio channel.
RIGHT CHANNEL
CHANNEL 1 to CHANNEL 16
Selects right audio channel.
SOUND OUT
ON
OFF
ON: Enables audio output.
OFF: Disables audio output.
LEVEL METER
OFF
1-8CH 9-16CH
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
OFF: Hides the audio level meter.
1-8CH: Displays the audio level meter (1-8ch)
9-16CH
: Displays the audio level meter (9-16ch)
Item Details
BASS Adjusts low pitch sounds.
MID Adjusts normal sounds.
TREBLE Adjusts pitch sound.
BALANCE Adjusts left and right volumes.
SURROUND Select ON or OFF.
AUDIO OUT (PIP)
MAIN: Selects main picture sound.
SUB: Selects PIP frame sound.
A
B
INPUT1
PC
A
B
INPUT1
PC
Musical note ♪ is displayed on right side of the audio output screen label.