Filter
Top Products
3
Installation
WARNING: We advise our customers to have the Parrot MKi9100 fitted by a professional.
Before you begin
Checking the car configuration
The cables supplied with the kit feature ISO connectors and two pairs of line-out jacks. The
line-out jacks can be used if your audio system features this option (use of an amplifier).
Several set-ups are therefore possible depending on the type of car stereo and your vehicle.
If your car stereo is not fitted with ISO connectors, you need to purchase an ISO adapter
cable to simplify the wiring procedure. Refer to the range of ISO adapters on our website.
Caution
Unplug the battery before installing the kit‟s power cable.
Before you install the individual components, check that the installation locations have been
selected in such a way that the cable length is sufficient to connect every element.
Do not install any component (screen, remote control…) in the airbag deployment area.
Once the installation is complete, make sure that no cables are pinched.
Removing the car stereo
Remove your car stereo from you vehicle. You may need release keys to do so.
► Refer to your car stereo user guide or contact your car dealer for more information.
Remove the audio system from your vehicles dashboard to access the wiring harness.
The mute function is used to cut the sound of your car stereo to enable a phone call. The
choice of the mute-in jack depends on your car stereo‟s configuration.