Filter
Top Products
Parrot MKi9200 – User guide 10
Using the Parrot MKi9200 for the 1st time
Associating
the control
unit with the
remote control
If the remote control doesn’t seem to be associated to the electronic
box while using the Parrot MKi9200 for the first time, press several
times the button while holding down the and buttons until the
«Pairing remote control» message is said.
This has to be done during a 30 seconds period once the ignition is
turned on.
Navigating
through the
menus
• Press the central jog wheel to access the menus.
> The kit says the name of the current menu.
• Browse through the menus by turning the wheel and confirm
with the button or by pressing the scroll wheel.
• To exit the menu, press the button or wait a few seconds.
Adjusting the
menu volume
To adjust the volume of the Parrot MKi9200, press the jog wheel and
select Settings > Audio > Menu Volume
.
Use the jog wheel to adjust
the desired volume then validate.
The Audio menu also allows you to deactivate the vocal menus.
For further information, refer to the Modifying the audio
settings section.
Pairing and
connecting a
phone / PDA via
Bluetooth
Prior to using your Parrot MKi9200 with your phone for the very first
time, you must initially pair both devices. The pairing process is only
required once.
1. Make sure the Parrot MKi9200 is set so that it is visible by all
Bluetooth ® devices. To do so, press the jog wheel and select
Settings > Bluetooth >Visibility. Then, make sure this option
is selected. If it is not the case, select it by pressing the jog
wheel.
The Parrot MKi9200 is visible by default.
2. Press the jog wheel and select Settings > Bluetooth > Pair
with…
.