Filter
Top Products
English
|
33
4 Exit Clock adjustment mode
Press the [MENU] button.
In Standby mode
Date Adjustment
1
Select Date Adjust mode
Push the knob towards [FM] or [AM].
Select the "Date Adjust" display.
2 Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.
3 Selecting the item (day, month, or year) to
adjust
Push the Control knob towards [4] or
[¢].
The items that are blinking are items that you
can adjust.
4 Adjust each item
Push the Control knob towards [FM] or [AM].
5 Repeat step 3 and 4 operation and adjust the
date.
6 Exit Date adjustment mode
Press the [MENU] button.
In Standby mode
Date Mode
Setting the date format.
1 Select Date Mode
Push the Control knob towards [FM] or [AM].
Select the "Date Mode" display.
2 Select the date format
Push the Control knob towards [4] or
[¢].
3 Exit Date mode
Push the Control knob towards [FM] or [AM].
In Standby mode
Synchronize Clock
Synchronizing the RDS station time data and this
unit’s clock.
Display Setting
"SYNC:ON" Synchronizes the time.
"SYNC:OFF" Adjust the time manually.
• It takes 3 to 4 minutes to synchronize the clock.
In Standby mode
Dimmer
Dimming this unit’s display automatically when
the vehicle light switch is turned ON.
Display Setting
"Dimmer:ON" The display dims.
"Dimmer:OFF" The display doesn’t dim.
In Standby mode
OFF Wait Time Setting
Setting the time until the faceplate hiding
operation starts after the power is turned OFF.
You can only remove the faceplate during the set
time period.
Display and Setting
"Off Wait:0sec"
…
"Off Wait:3sec" (Original setting)
…
"Off Wait:25sec"
Function of the KDC-W707
In Standby mode
Switching preout
Alternating the preout between the rear and
subwoofer. (With the subwoofer the sound
outputs without being effected by fader control.)
Display Setting
"SWPRE:Rear" Rear preout.
"SWPRE:Sub-W" Subwoofer preout.