Filter
Top Products
13
6.2 IR
You can connect to host PC with IR (Infrared) transmission . Place your 100WT10P and the target
device in line of sight of each other and at a distance of no more than one meter.
On your 100WT10P to setup for IR
1.Tap START
2.Tap SETTINGS
3.Tap CONTROL PANEL
4.Tap the PC CONNECTION
5. Check the box:Allow connection with desktop computer when device is attached.
6.Tap CHANGE
7. In the pull-down menu, choose IR to PC
8.Tap OK
Then start the ActiveSync application
1.Tap on START
2.Tap on PROGRAM
3.Tap on ACTIVESYNC
The host PC will detect the 100WT10P and initiate a connection.
6 DATA SYNCHRONIZATION