Philips 32PFL3x06H Car Satellite TV System User Manual


 
26
Step 2: Download and update the
latest software version
1 Connect a USB storage device.
2 Press .
3 Select [Setup] > [Update software].
4 Follow the instructions to load a le onto
your USB storage device.
5 Connect the USB storage device to your
computer, then double-click the le.
» A Web page is launched.
6 Follow the instructions in the Web page.
If the current software version
matches the latest software update
le, you do not need to update your
TV software.
If the current software version is
smaller than the latest software
update le, download the latest
software update le to the root
directory of your USB device.
7 Disconnect the USB storage device from
the computer.
Step 3: Update the TV software
1 Connect your USB storage device to the
TV.
» The TV detects the USB ash drive and
starts to scan for software version.
2 If a message prompts you to update the
software, follow the on-screen instructions
to update the TV software.
3 If the message is not displayed, continue
with the following steps:
4 Press .
5 Select [Setup] > [Software settings] >
[Local updates].
6 Select the le that you downloaded, then
press OK to update the TV software
manually.
7 Follow the on-screen instructions to
complete the update.
8 To exit, press .
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Ways to update the TV software
You can update the TV software in one of the
following ways:
A: with a USB storage device,
B: when prompted through digital broadcasts, or
C: after being prompted through digital
broadcasts.
A: Update with a USB device
To update with a USB storage device, you need:
An empty USB ash drive. The USB ash
drive must be FAT or DOS-formatted. Do
not use a USB hard drive.
A computer with Internet access
An archive utility that supports the ZIP
le format (for example, WinZip® for
Microsoft® Windows® or Stuft® for
Macintosh®).
Step 1: Check the current software
version
1 Press .
2 Select [Setup] > [Software settings] >
[Current software inf].
» The current software information is
displayed.
3 Write down the software version number.
4 To return, press OK.
5 To exit, press .
EN
Downloaded From TV-Manual.com Manuals