Filter
Top Products
38
Congure TV speakers
You usually connect the TV to a HDMI-CEC
compliant device such as a HTS using both
a HDMI cable (for video) and a digital audio
cable (for audio). You can output TV audio
through the HDMI cable solely, provided both
the TV and device are HDMI-ARC compliant
(see ‘Use HDMI ARC’ on page 36).
1 When watching TV, press (Home).
The home menu appears. »
2 Press the Navigation buttons to select
[Setup], then press OK.
3 Select [Advanced TV settings], then
press OK.
4 Select [EasyLink] > [TV speakers], then
press OK.
5 Select a setting, then press OK.
• [On]: Turns on TV speakers.
• [Off]: Turns off TV speakers.
• [EasyLink]: TV audio is streamed
through the TV speakers. Switch the
TV audio to the connected HDMI-
CEC audio device through the
experience menu.
• [EasyLink autostart]: Turn off TV
speakers automatically and streams
TV audio to the connected HDMI-
CEC audio device.
Select speakers in experience mode
If you have set your TV speakers to [EasyLink]
or [EasyLink autostart], access the experience
bar to switch the TV audio.
1 When watching TV, press
(Experience).
The experience bar appears. »
2 Press the Navigation buttons to select
[Speakers], then press OK.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not •
intend to use it.
1 When watching TV, press (Home).
The home menu appears. »
2 Press the Navigation buttons to select
[Setup], then press OK.
3 Select [Advanced TV settings], then
press OK.
4 Select [EasyLink] > [EasyLink], then
press OK.
5 Select [On] or [Off] .
6 Press OK to conrm your choice.
EasyLink is enabled or disabled. »
Enable or disable remote control key
forwarding
Note
Enable EasyLink before enabling remote •
control key forwarding.
1 When watching TV, press (Home).
The home menu appears. »
2 Press the Navigation buttons to
select[Setup], then press OK.
3 Select [Advanced TV settings], then
press OK.
4 Select [EasyLink] > [EasyLink Remote
Control], then press OK.
5 Select [On] or [Off].
6 Press OK to conrm your choice
RC key forwarding is enabled or disabled »
on the selected HDMI connector.
Note
If you cannot exit from a device’s menu, press •
.
EN
Downloaded From TV-Manual.com Manuals