Filter
Top Products
18
Listen to Digital Audio
Broadcasts (DAB)
Digital Audio Broadcasting (DAB), is a way
of broadcasting radio digitally through a
network of transmitters. It provides you with
more choice, better sound quality and more
information.
For the first time when DAB mode is
switched on.
1 Press SOURCE on the main unit repeatedly
to select DAB/DAB+.
The system performs auto scan. »
All the available DAB stations is stored. »
The radio tunes to the first available »
station.
Tip
The display shows a rectangle. The position •
of the rectangle indicates the degree of signal
strength. (The further towards the right, the
greater the signal strength.)
If there is no DAB coverage currently available,
•
or DAB signal is too weak in your area, no
DAB station will be found, and message like
“No Station Found, Scan Again” displays.
Tune to DAB radio station manually
1 Under DAB mode, press and hold /
to enter manual seek mode.
“MANUAL” blinks on LCD screen. »
2 Press / repeatedly until the the
desired channel/frequency appears.
Scan for new DAB stations
1 Under DAB mode, press MENU
repeatedly until [DAB SCAN] is displayed.
2 Press to confirm.
The system scans for all available DAB »
radio stations and broadcasts the first
station.
Receive traffic announcement
If you do not want to miss traffic
announcement when enjoying music, turn on
the TA (Traffic Announcement) function.
1 Press MENU or OPTIONS.
2 Press or repeatedly until [TA] is
displayed.
3 Rotate to select a setting:
• [TA ON]: When there is traffic
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the traffic conditions.
When the traffic announcement
is over, it returns to the previous
mode.
• [TA OFF]: Traffic announcement
does not cut in.
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock
of the unit automatically.
1 Press MENU.
2 Press or repeatedly until [CT] is
displayed.
3 Rotate to select a setting:
• [CT ON]: Turn on the RDS clock.
Time shown on the unit synchronizes
with that on the RDS station.
• [CT OFF]: Turn off the RDS clock.
Tip
The accuracy of the transmitted time depends •
on the RDS station that transmits the time
signal.
EN