Philips CEM3100 Car Stereo System User Manual


  Open as PDF
of 28
 
10 EN
7 Reconnect the negative terminal of the car
battery.
Attach the front panel
1
Attach the trim plate.
2 Insert the right side of the panel in the
chassis until it is correctly engaged.
3 Press the left side of the panel until the
mechanism locks it into place.
Install remote control battery
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
• Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Forrst-timeuse:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Turn on
To turn on the unit,
• Press
.
To turn off the unit,
• press and hold
until the unit is
turned off.
Set clock
1 Press MENU repeatedly until current time
isashed.
2 Rotate to set hour.
3 Press toconrm.
4 Rotate to set minute.
5 Press toconrm.
Set clock format
1
Press MENU.
2 Press or repeatedly until [CLOCK
FORMAT] is displayed.
3 Rotate to select a setting:
• [CLOCK 12H]
• [CLOCK 24H]
 previous next