Philips CEM3100 Car Stereo System User Manual


 
14 EN
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1 Press MENU.
2 Press or repeatedly until [CT] is
displayed.
3 Rotate to select a setting:
• [CT ON]: turn on the RDS clock. Time
shown on the unit synchronizes with
that on the RDS station.
• [CT OFF]: turn off the RDS clock.
Tip
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
5 Play audio files
Note
Ensurethatthediscordevicecontainsplayableles.
Play a disc
Note
You cannot play CDs encoded with copyright
protection technologies.
You can play commercially available audio CDs
and these discs:
• CD-Recordables (CD-R)
• CD-Re-writables (CD-RW)
• MP3 CDs
• WMA CDs
Note
Ensure that the disc contains playable content.
Insert a CD with the printed side facing up.
» Play starts automatically.
• To pause CD play, press
.
• To resume CD play, press
again.
• To skip to the previous/next track, press
or .
• To search backward/forward rapidly within
the current track, press
or for 3
seconds.
Remove the CD
To take out the CD, press
on the front panel.
Tip
If the disc is blocked in the disc compartment, press and
hold
until the disc comes out.