Filter
Top Products
10
5 Product
information
Note
Product information is subject to change •
without prior notice.
Power output
(RMS)
- 4 ohm 75W x 2
- 2 ohm 110W x 2
- 4 ohm
(bridged)
220W x 1
Total harmonic
distortion
0.09%
Signal to noise
ratio
100dB
Channel separation 50dB
Frequency
response
5-50kHz
Input sensitivity 300mV - 6V
Input impedance 22k ohm
Fuse rating 30A x 1
Dimensions (D x
W x H)
246 x 240 x
54mm
Weight 1.98kg
1 Take out the disc or tape and turn off the
car audio.
2 Check the cause of the malfunction.
3 If the amplifier is overheated, let it cool
down.
Replace fuse
If there is no power, the fuse might be damaged
and need to be replaced.
1 Pull out the damaged fuse.
2 Replace the fuse with the supplied fuse or
buy a new fuse that matches the rating of
the damaged fuse (30A x 1).
If the fuse gets damaged immediately after it
has been replaced, the amplifier might have
internal malfunction. Consult qualified personal
for repair.
EN