Filter
Top Products
7
Connect car audio
Option 1: Line input connection
Connect the amplifier to the car audio with an
RCA cable (not supplied).
Car audio unit
LINE OUT
Option 2: Line output connection
Connect the amplifier to another amplifier.
Connect power
1
Make the power connection as illustrated
below:
Connect the ground wire from the •
car to the GND socket.
Connect the remote wire from the •
car audio to the REM socket.
With this connection, you can turn •
on/off the amplifier with the car
audio.
Connect the power wire from the •
car battery to the +12V socket.
Connect speakers
Note
Use speakers with an impedance of 2 to 8 ohm •
(4 to 8 ohm when used as a bridged amplifier).
Match the “left”, “right”, “+” and “-” terminals
•
correctly. Revised polarity may degrade sound
quality.
Option 1: Stereo mode: connect 2 speakers
4 ohm
speaker
4 ohm
speaker
(
30A
)
Option 2: Mono bridged mode: connect
1 speaker
4 ohm
speaker
(
30A
)
Option 3: Tri-mode: connect 3 speakers
(
30A
)
4 ohm
speaker
8 ohm speaker
4 ohm
speaker
English
EN