Filter
Top Products
7
CQ-DFX972N
4
E
N
G
L
I
S
H
Volume
[VOLUME] (Clockwise) / [VOL}] : Up
[VOLUME] (Counterclockwise) / [VOL{] : Down
Mute / Attenuation
(Only for remote control)
ON
: Press [MUTE].
OFF : Press again.
Decreasing volume range depends on setting.
(Mute / Attenuation setting
a Page 28)
Note: The sound level for each source is stored in
memory. (For radio, one volume setting for AM, one
volume setting for all FMs)
Setting Range : 0 to 40
: No sound
: Decrease the volume to
1/10 of previous level.
When Power is ON...
Press [DISP].
Display Change
Mode Display *1
Mode & Spectrum
Analyzer Display
When Power is OFF... ( )
Press [DISP].
Clock Display
(Back light is on) (Back light is off)
Display OFF
Spectrum Analyzer Display *2
Display OFF *3 Mode & Clock Display
AUDIO Indicator
*1 The title information can be
displayed in the CD/MP3/CD
changer mode. (
a Page 17,
19 and 23)
*2 If you press a button, the
Mode & Spectrum Analyzer
Display appears for 5
seconds.
*3 If you press a button, the
light is turned on, the Mode
Display appears, and
the light is turned off
approximately 5 seconds
later.
Notes:
¡If title or name display is set to ON in any mode, mode display is automatically
selected. (a Page 17, 19 and 23 )
¡Set the Spectrum Analyzer pattern in a separate procedure. (a Page 26)
¡When RDS’s Clock Time (CT) service is not received, “NO CT” is displayed.
Adjust the clock. (a Page 26)
¡Do not watch moving images or title/name scroll on the LCD while driving.
Press and hold [DISP] for more than 2 seconds.
Indicators which are not displayed on Mode Display are displayed.
(Audio setting and MP3 data information, etc.)
Press
[DISP] again to cancel.
Note: When RDS’s Clock Time (CT) service is not received, “NO CT” is displayed. Adjust the clock. (a Page 26)
ACC ON