Philips MCD2160 Car Stereo System User Manual


  Open as PDF
of 26
 
23 EN
No disc detected
• Insert a disc.
• Check if the disc is inserted upside down.
• Wait until the moisture condensation at
the lens has cleared.
• Replace or clean the disc.
• UseanalizedCDorcorrectformatdisc.
Disc does not play
• Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
• Press
to exit the system setup menu.
• Disable the password for parental control
or change the rating level.
• Moisture has condensed inside the system.
Remove the disc and leave the system
turned on for about an hour. Disconnect
and reconnect the AC power plug, and
then turn on the system again.
No picture
• Check the video connection.
• Turn on the TV to the correct Video-In
channel.
• Progressive scan is activated but the TV
does not support progressive scan.
Black and white or distorted picture
• The disc does not match the TV color
system standard (PAL/NTSC).
• Sometimes a slight picture distortion may
appear. This is not a malfunction.
• Clean the disc.
• A distorted picture may appear during
progressive scan setup.
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
• Theaspectratioisxedontheloaded
DVD disc.
• The aspect ratio may not be changed for
some TV systems.
DivX video les cannot be played.
• EnsurethattheDivXvideoleis
complete.
• Ensurethattheleextensioniscorrect.
• Due to Digital Rights issue, the DRM-
protectedvideolescannotbeplayed
through an analog video connection (e.g.
composite, component and scart). Transfer
the video content onto the Disc Media
andplaytheseles.
Audio or subtitle languages cannot be set
• The disc is not recorded with sound or
subtitles in multiple languages.
• The audio or subtitle language setting is
prohibited on the disc.
Cannot display some les in USB device
• ThenumberoffoldersorlesintheUSB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
• Theformatsoftheselesarenot
supported.
USB device not supported
• The USB device is incompatible with the
unit. Try another one.
Poor radio reception
• Increase the distance between the
apparatus and your TV or VCR.
• Fully extend the FM antenna.
Timer does not work
• Set the clock correctly.
• Switch on the timer.
Clock/timer setting erased
• Power has been interrupted or the power
cord has been disconnected.
• Reset the clock/timer.
 previous next