Philips MCD2160 Car Stereo System User Manual


 
8EN
3 Connect
Place the unit
1 Place the unit near to the TV.
2 Placetheleftandrightspeakersatequal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
Place this unit on top of a table or mount it on the wall.
Never place this unit in an enclosed cabinet.
Install this unit near the AC outlet where the AC power
plug can be easily reached.
Connect speakers
Note
For optimal sound, use the supplied speakers only.
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specicationssectionofthismanual.
Connect video cables
You can select the best video connection that
your TV supports.
• Option 1: Connect through a composite
video (CVBS) cable (for a standard TV).
• Option 2: Connect through component
video cables (for a standard TV or
Progressive Scan TV).
Option 1: Connect through a
composite video cable
Connect the composite video cable (supplied)
to:
• the VIDEO socket on the back of the unit.
• the video input socket on the TV.
SPEAKER OUT
FM
ANTENNA
100-240 V~50/60 Hz
AC MAINS~
SPEAKER OUT
SPEAKER OUT
FM
ANTENNA
100-240 V~50/60 Hz
AC MAINS~
TV