Philips OR2200 Car Stereo System User Manual


  Open as PDF
of 24
 
8 EN
5 Usethealarm
timer
Note
• Make sure that you have set the clock correctly.
Setanalarm
You can set two alarms.
1 Press and hold AL1 (or AL2) for two
seconds.
» [Alarm1] (or [Alarm2]) is displayed
with AL1 (or AL2) blinking.
» The current alarm time is displayed
with hour digits blinking.
2 Press / to set the hour, and then
press to conrm.
» The minute digits begin to blink.
3 Press / to set the minute, and then
press to conrm.
» The alarm source name begins to
blinks: [DAB], [FM], or [Buzzer].
4 Press / to select an alarm source,
and then press to conrm.
• If [DAB] or [Buzzer] is selected as
the alarm source, press to
select a preset radio station or the last
listened station.
» The alarm frequency blinks: [Daily]
(daily), [Weekdays] (weekdays),
[Weekends] (weekends), or [Once]
(once).
5 Press / to select a frequency, and
then press to conrm.
» The alarm volume level blinks.
6 Press / to select the volume level,
and then press to conrm.
» [AlarmSaved] ashes.
Deactivateapresetalarm
1 Press AL1 (or AL2) to view alarm settings.
2 Press AL1 (or AL2) again.
» [Alarm1] (or [Alarm2]) and [On] is
displayed.
3 Press AL1 (or AL2) repeatedly to select
[On] or [Off].
• [On]: The preset alarm is activated.
• [Off]: The preset alarm is deactivated.
» AL1 (or AL2) is displayed when the
preset alarm is activated.
» AL1 (or AL2) disappears when the
preset alarm is deactivated.
Snoozethealarm
When an alarm sounds, press SNOOZE.
» The alarm repeats after 9 minutes.
Stopthealarm
When the rst (or second) alarm sounds, press
AL1 (or AL2).
» The alarm stops and then repeats at
the set time.
 previous next