Filter
Top Products
Amplier Owner’s Manual
© 2011 Phoenix Gold • www.phoenixgold.com
SUBWOOFER CHANNEL SPECIFICATIONS
Frequency Response: ± 1dB from 20Hz to 300Hz
Signal to Noise Ratio: >90dB
Subsonic and Low Pass Crossovers: 24dB per octave
Low Pass Crossover Range: 30Hz to 300Hz
Subsonic Crossover Range: 10Hz to 55Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 1 ohm
Typical Eciency: 80%
Damping Factor: Greater than 200
FRONT AND REAR CHANNEL SPECIFICATIONS
Frequency Response: ± 1dB from 20Hz to 20kHz
Signal to Noise Ratio: >110dB
High and Low Pass Crossovers: 18dB per octave
Front High Pass Crossover Range: 40Hz to 4kHz
Rear High Pass Crossover Range: 10Hz to 300Hz
Rear Low Pass Crossover Range: 40Hz to 4kHz
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 4 ohm Bridged or 2 ohm Stereo
Typical Eciency: 50%
Damping Factor Greater than 200
Dynamic Power 14.4Vdc >1% THD 800 x 1 @ 2 ohm
1000 x 1 @ 1 ohm
RMS Power 14.4Vdc ≤ 1% THD 550 x 1 @ 2 ohm
800 x 1 @ 1 ohm
Dynamic Power 14.4Vdc >1% THD 100 x 4 @ 4 ohm Stereo
150 x 4 @ 2 ohm Stereo
300 x 2 @ 4 ohm Bridged
RMS Power 14.4Vdc ≤1% THD 90 x 4 @ 4 ohm Stereo
120 x 4 @ 2 ohm Stereo
240 x 2 @ 4 ohm Bridged
Specifications
OVERALL SPECIFICATIONS
Recommended Fuse Size: 150A
Minimum Power/Ground Wire Size: 1/0 Gauge
Dimensions: 28.2” L x 9.8” W x 2.5” H
716mm x 252mm x 62mm