Pico Macom CA-30RK559 Car Amplifier User Manual


 
CA-30RK550
Descriptions
550MHz Push-Pull Headend Amplifier
4
Rev. 08/03
Ph: 800-421-6511
www.picomacom.com
CA-30RK550
Wide 54-550MHz frequency
range (Channels CATV 2-78,
95-99)
Available in either 30dB or 45dB
gain configurations for optimal
carrier-to-noise ratio and supe-
rior picture quality
± 0.5dB flatness across band
provides low distortion and
excellent frequency response
Employs state-of-the art hybrid
push-pull technology for distor-
tion-free audio-video quality
Adjustable slope and gain con-
trols for easy system balancing
Front panel controls and test
point enable easy setup and
monitoring
Double shielded enclosure pro-
vides over 95dB RFI shielding
performance reducing leakage
and ingress
Built-in lightning and line volt-
age surge protection protects
the unit from damage
Also available in a wall mount
versions as CA30-550 or
CA45-550 Distribution Amplifiers
The Pico Macom CA-30RK550 and CA-45RK550 are professional re-broad-
cast grade push-pull amplifiers producing signals with extremely low noise and
harmonic distortion. In the CA-45RK550, the state-of-the-art hybrid amplifier
module is preceded by a single transistor stage preamplifier to achieve the
total gain of 45dB. The amplifiers are capable of 82 channel operation over the
54-550MHz range. These rack-mounted amplifiers make excellent headend
launch amplifiers and are frequently used in conjunction with Pico Macom’s
passive headend combiners (PHC12G or PHC24G) to overcome losses asso-
ciated with signal combining in CATV and SMATV systems. Also, the
CA30RK550 and CA45RK550 are ideally suited for amplifying the cable input
prior to Pico Macom’s CEF channel elimination filter in applications requiring
“mix-and-match” channel applications or those requiring local insertion. Pico
Macom backs up this product with its industry leading 5-year limited warranty.
550MHz Push-Pull Headend Amplifiers
CA-30RK550 Manual.qxd 9/9/03 3:01 PM Page 4