Filter
Top Products
CA-30RK550
6
Rev. 08/03
Ph: 800-421-6511
www.picomacom.com
Operation and Controls
Front Panel
1. OUT:
The amplified RF signal is available at this port.
2. IN:
The input RF signal is connected to this port.
3. Power Cord:
This three prong polarized power cord is approved by both UL and
CSA for safe operation of the amplifier. Do not cut the ground terminal
for both safety and operational reasons. Connect to 108 to 125 Vac,
50/60 Hz electrical outlet
Back Panel
1
3
3
1. Power On LED:
Indicates power is on when lit.
2. R.F. Gain:
Adjust potentiometer for overall amplifier gain level.
3. Tilt:
Adjust potentiometer provides for slope adjustment over entire bandwidth.
4. -30dB Output Test Monitor:
Output test point is provided for amplifier set up and monitoring.
1
2 3
4
CA-30RK550 Manual.qxd 9/9/03 3:02 PM Page 6