Filter
Top Products
Introduction of audio
adjustments
4
3
1
5
6
2
1 SFEQ indicator
Appears in the display when SFEQ function
can be activated.
2 Loudness indicator
Appears in the display when loudness is
turned on.
3 SW indicator
Shows when the subwoofer output is turned
on.
4 Audio display
Shows the audio adjustments status.
5 EQ-EX indicator
Appears in the display when EQ-EX function
can be activated.
6 CUSTOM indicator
Shows when custom equalizer curve is pre-
sently selected.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)EQ-L (equalizer
curve adjustment)B (bass and treble level
adjustment)LOUD (loudness)SUB, W
(subwoofer on/off setting)/NOFAD (non fading
output on/off setting)80: 0 (subwoofer set-
ting)/NOFAD (non fading output setting)
HPF (high pass filter)SLA (source level ad-
justment)
# If EQ-EX function hasbeen selected and only
when EQ-EX is turnedon and CUSTOM is se-
lected as the equalizercurve, you canswitch to
B.
# When the subwoofercontroller setting is only
P/O :FUL, you cannotswitch to SUB, W. (Refer to
page 31.)
# You canselect the 80: 0 onlywhen subwoofer
output is turned onin the SUB, W.
# When the subwoofercontroller setting is only
P/O :FUL, you canswitch to the non fadingout-
put on/off setting.(Refer to page 31.)
# You canselect the non fading outputsetting
only when non fadingoutput is turned on inthe
non fading output on/offsetting.
# When selecting the FM tuner asthe source,
you cannot switchto SLA.
# To return to the display of eachsource, press
BAND.
Note
If you do not operatethe audio function within
about 30 seconds,the display is automatically re-
turned to the sourcedisplay.
Compensating for
equalizer curves (EQ-EX)
The EQ-EX compensates for each equalizer
curve. Furthermore, you can adjust bass and
treble for each source when CUSTOM curve is
selected.
! If SFEQ has been previously selected, press
EQ-EX and hold to switch to EQ-EX and
EQ-EX appears in the display.
% Press EQ-EX to turn EQ-EX on.
EQ-EX:ON appears in the display. EQ-EX is
now on.
# To turn EQ-EX off, press EQ-EX.
Audio Adjustments
En
23
English
Section
07
HHHHHHHHHHHHHH