Filter
Top Products
function on after selectingthe SFEQ setting, you
can combine HPFfunction with SFEQ
function.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the volume level of
the FM tuner, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just (e.g., built-in CD player).
2 Press AUDIO to select SLA.
Press AUDIO until SLA appears in the display.
3 Press a or b to adjust the source vo-
lume.
Each press of a or b increases or decreases
the source volume.
SLA : +4 SLA : 4 is displayed as the source
volume is increased or decreased.
Notes
! Since the FM tuner volume is the control,it is
not possible to apply source leveladjustments
to the FM tuner.
! The AM tuner volume level can also bead-
justed with source leveladjustments.
! The built-in CD playerand the multi-CD player
are set to thesame source level adjustment
volume automatically.
! External unit 1 andexternal unit 2 are set to
the same source leveladjustment volume
automatically.
Audio Adjustments
En
29
English
Section
07
HHHHHHHHHHHHHH