Filter
Top Products
! Even if you are listening to a songon your
Bluetooth audio player andyou switch to an-
other source, song playback continues.
% Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
% Select a track
Push MULTI-CONTROL left or right.
Notes
! For details concerning operation, refer to the
Bluetooth adapter’s operationmanual. This
section provides brief information on Blue-
tooth audio player operationswith this unit,
which slightly differs or is abbreviated from
that described in the Bluetooth adapter’s op-
eration manual.
! Even though your audio player does not con-
tain a Bluetoothmodule, you can still control
it from this unit via Bluetooth wireless tech-
nology. To control your audioplayer usingthis
unit, connect a product featuring Bluetooth
wireless technology (available on the market)
to your audioplayer andconnect the Blue-
tooth adapter (e.g. CD-BTB200) to thisunit.
Function and operation
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
function.
Connection open (connection open)—
Disconnect audio (disconnect audio)—Play
(Play)—Stop (Stop)—Pause (pause)—
Device info. (device information)
# Pause is the same as that of thebuilt-in CD
player. (Refer to Pausing playback on page 16.)
Notes
! To return to the ordinary display, press
BAND/ESC.
! If a Bluetooth audio player is not connected to
this unit yet,Connection open and
Device info. appear in the function menu and
other functions are not available.
! If a Bluetooth audio player is connected via
AVRCP (Audio/Video Remote Control Profile),
Connection open does not appear in the
function menu and the other functions are
available.
! If a Bluetooth audio player is connected via
A2DP (Advanced Audio Distribution Profile) ,
only Disconnect audio and Device info. ap-
pear in the function menu.
! If you do not operate functions other than
Connection open and Disconnectaudio
within about 30 seconds, the display is auto-
matically returned to theordinary display.
Connecting a Bluetooth audio
player
1 Use MULTI-CONTROL to select
Connection open in the function menu.
Refer to Function and operation on this page.
2 Press MULTI-CONTROL to open the con-
nection.
Always waiting is displayed. This unit is now
on standby for connection from Bluetooth
audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
Note
Before you can use audio players you may need
to enter the PIN code into this unit. If your player
requires a PIN code to establish a connection,
look for the code on the player or inits accompa-
nying documentation. Refer to EnteringPIN code
for Bluetooth wireless connection on page 31.
Available accessories
En
38
Section
06