Filter
Top Products
Shows REJECT when the automatic rejecting
function is on (for moredetails, referto Setting
automatic rejecting onpage 47).
7 Clock display
Shows the time (if connected with a phone).
8 Calendar display
Shows the day, month and year (if connected
with a phone).
Important
! Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using thisunit withoutrunning
the engine can result in battery drainage.
! Advanced operations that requireyour atten-
tion such as dialing numbers on the monitor,
using phone book, etc., are prohibited while
you are driving. When you need to use these
advanced operations, stop your vehicle in a
safe place.
Notes
! The equalizer curve forthe phone source is
fixed.
! When selecting the phone source, you can
only operate Fader (balanceadjustment) in
the audio menu.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to Connecting a cellular phone on
page 42.
# Your phone should nowbe temporarilycon-
nected. However, to make best use of the technol-
ogy, we recommend you register the phone to
this unit.
2 Registration
To register your temporarily connected phone,
refer to Registering a connected cellular phone
on page 43.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is recorded in this unit as the default set-
ting.
# Caller’s voice volumeand ring volume may
vary depending on the type of cellular phone.
# If the difference between the ring volume and
caller’s voice volumeis big, overall volume level
may become unstable.
# Before disconnecting the cellularphone from
this unit, makesure to adjust the volume to a
proper level. If the volume is muted (zero level)on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected.
Making a phone call
Voice recognition
1 Press BAND/ESC and hold until
Voice dial appears in the display.
Voice dial appears in the display. When
Voice dial ON is displayed, voice recognition
function is now ready.
# If your cellularphone does not feature voice
recognition function, No voice dial appears in
the display and operation is not possible.
2 Pronounce the name of your contact.
Available accessories
En
40
Section
06