Filter
Top Products
3 Press MULTI-CONTROL to open the con-
nection.
Always waiting flashes and the unit is now
on standby for connection from a cellular
phone.
4 Use cellular phone to connect to this
unit.
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PINcode for Bluetooth wireless con-
nection on page 33.
Disconnecting a cellular phone
1 Display the function menu.
Refer to Function and operation on page 42.
2 Use MULTI-CONTROL to select
Disconect phone in the function menu.
Device name of the connected phone appears
in the display.
3 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After disconnection is completed,
Disconnected is displayed.
Registering a connected
cellular phone
1 Display the function menu.
Refer to Function and operation on page 42.
2 Use MULTI-CONTROL to select
Set phone in the function menu.
3 Push MULTI-CONTROL up or down to
select a registration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
# As you select each assignment, you can see
whether or nota phone is already registered. If
the assignment is empty, No data is displayed. If
the assignment is already taken, the device name
appears. To replace an assignment with a new
phone, first delete the current assignment. For
more detailed instructions, see Deleting a regis-
tered phone on this page.
4 Press MULTI-CONTROL to register the
currently connected phone.
When registration is completed,
Reg.Completed is displayed.
# If the registration fails, Reg.ERROR is dis-
played. In this case, return to step 1 and try
again.
Deleting a registered phone
1 Display the function menu.
Refer to Function and operation on page 42.
2 Use MULTI-CONTROL to select
Delete phone in the function menu.
3 Push MULTI-CONTROL up or down to
select a registration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
# If the assignment is empty, No data is dis-
played and operation is not possible.
4 Push MULTI-CONTROL right to select
Delete YES.
Delete YES is displayed. Deleting phone is
now on standby.
5 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted, Deleted is dis-
played.
Available accessories
En
44
Section
06