Filter
Top Products
# You can select SW.2 and SW.3 only when sub-
woofer output is turned on in SW.1.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned.
Using the position selector
One way to assure a more natural sound is to
clearly position the stereo image, putting you
right in the center of the sound field. The posi-
tion selector function lets you automatically
adjust the speakers output levels and inserts
a delay time to match the number and posi-
tion of occupied seats.
1 Press AUDIO to select POSITION.
Press AUDIO until POSITION appears in the
display.
2 Press c/d/a/b to select a listening po-
sition.
Button Display Position
c Front Left Front seat left
d Front Right Front seat right
a Front Seat Front seats
b All Seat All seats
# To cancel the selected listening position,
press the same button again.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD/BAL.
Press AUDIO until FAD/BAL appears in the
display.
2 Press a or b to adjust front/rear speak-
er balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
FAD: F25 FAD: R25 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD:FR00 is the proper setting when only two
speakers are used.
3 Press c or d to adjust left/right speaker
balance.
Each press of c or d moves the left/right
speaker balance towards the left or the right.
BAL: L25 BAL: R25 is displayed as the left/
right speaker balance moves from left to
right.
Using the time alignment
The time alignment lets you adjust the dis-
tance between each speaker and the listening
position.
1 Press AUDIO to select TA.1.
Press AUDIO until TA.1 appears in the dis-
play.
2 Press c or d to select the time align-
ment.
Each press of c or d selects time alignment
in the following order:
Initial (initial)Custom (custom)Auto TA
(auto-time alignment)TA OFF (off)
! Initial is the factory supplied time align-
ment.
! Custom is an adjusted time alignment that
you can create for yourself.
! Auto TA is the time alignment created by
auto TA and EQ. (Refer to Auto TA and EQ
Audio Adjustments
En
40
Section
08