Filter
Top Products
(auto-time alignment and auto-equalizing)
on page 46.)
# Please set Auto TA appears. This indicates
that you cannot select Auto TA if auto TA and EQ
has not been carried out.
Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment is memorized
in Custom.
1 Press AUDIO to select TA.1.
Press AUDIO until TA.1 appears in the dis-
play.
2 Press a or b to select a unit of distance.
Press a to select centimeter and cm appears
in the display. Press b to select inch and inch
appears in the display.
3 Press AUDIO to select TA.2.
Press AUDIO until TA.2 appears in the dis-
play.
# When selecting TA OFF in TA.1, you cannot
switch to TA.2.
4 Press c or d to select the speaker to be
adjusted.
Each press of c or d selects the speaker in
the following order:
12
4
35
1 Front speaker left
2 Front speaker right
3 Rear speaker right
4 Rear speaker left
5 Subwoofer
Front speaker leftFront speaker rightRear
speaker rightRear speaker left Subwoofer
# You cannot select subwoofer when the sub-
woofer output is off.
# You cannot adjust the time alignment when
neither Front Left nor Front Right is selected in
the position selector mode.
5 Press a or b to adjust the distance be-
tween the selected speaker and the listen-
ing position.
Each press of a or b increases or decreases
the distance.
400.0cm 0.0cm is displayed as the distance
is increased or decreased, if you have selected
centimeters (cm).
160inch 0inch is displayed as the distance
is increased or decreased, if you have selected
inches (inch).
# You can adjust the distance for the other
speakers in the same way.
6 Press BAND to cancel the time align-
ment mode.
Using subwoofer output
This unit is equipped with a subwoofer output
which can be switched on or off. When a sub-
woofer is connected to this unit, turn the sub-
woofer output on.
The subwoofer output phase can be switched
between normal and reverse.
1 Press AUDIO to select SW.1.
Press AUDIO until SW.1 appears in the dis-
play.
2 Press a to turn subwoofer output on.
SW : ON appears in the display. Subwoofer
output is now on.
# To turn subwoofer output off, press b.
Audio Adjustments
En
41
English
Section
08