Filter
Top Products
18
Chapter 1
Basic Operation
Basic Navigation
The most frequently used function is the Address
Search, in which the address is specified and the
destination searched. This section describes how
to use the Address Search and the basics of
using the Navigation System.
• For safety reasons, you cannot use these
basic navigation functions while your
vehicle is in motion. To enable these func-
tions, you must stop in a safe place and
put on the parking brake.
Basic flow of operation
1 Press the NAVI MENU button to display
the main menu.
2 Touch “Address Search”.
Selects the method for searching the destina-
tion.
➲ Return Home ➞ Page 30
➲ Go to ➞ Page 30
➲ POI Search ➞ Page 27
➲ Vicinity Search ➞ Page 28
➲ Address Book ➞ Page 31
➲ Destination History ➞ Page 31
➲ Freeway Search ➞ Page 29
➲ Telephone Search ➞ Page 30
➲ Cancel Route ➞ Page 35
3 Touch “Zone code key”.
If the destination is in another zone, this
changes the zone setting.
❒ Once the zone has been selected in the
system settings, you only have to change
zones when your destination is outside
your existing zone.
4 Touch the zone code of the destination
and touch “OK”.
Modifies the zone setting and returns you to
the previous display.
1 Insert the Pioneer DVD map disc to
the disc loading slot.
2 Press the NAVI MENU button to dis-
play the Main menu.
3 Select “Destination” from the Main
menu.
4 Select the method of searching for
your destination.
5 Enter the information about your des-
tination.
6 Your Navigation System sets the route
to your destination, and the map of
your surroundings appears.
7 After releasing the parking brake,
drive in accordance with the naviga-
tion information, subject of course to
the important safety instructions
noted on page 10-12.
Zone code key