Filter
Top Products
13
Chapter 1 How to Use Navigation System and Names of the Parts
Turning the Navigation System
On and Selecting a Source
• If the program is not installed, see Opera-
tion Manual and install the program.
1 Turn the ignition switch (ACC) ON.
The navigation system’s power supply comes
on.
2 Press the SRC button to select a source.
Press the SRC button repeatedly to switch
between the following sources:
“XM” (XM tuner) — “SIRIUS” (SIRIUS tuner)
—“RADIO” (tuner) — “TV” (television) —
“AV” (video input) — “S-DVD” (DVD player/
multi-DVD player) — “CD” [CD, MP3/WMA/
WAV](built-in CD drive) — “M-CD” (multi-CD
player) — “EXT-1” (external unit 1) — “EXT-
2” (external unit 2) — “AUX” (Auxiliary equip-
ment)
❒ Press and hold to turn the source off.
❒ In the following cases, the sound source can-
not be used:
— When a unit corresponding to each source
is not connected to this product.
— When no disc is set in the CD loading slot.
— When no disc is set in the DVD-player (“S-
DVD”).
— When no magazine is set in the multi-CD
player.
— When no magazine is set in the multi-DVD
player.
—When the “AUX” (auxiliary input) is set to
off (refer to Operation Manual).
—When the “AV INPUT” (video input) is not
set to “VIDEO” (refer to Operation Manual).
❒ External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this product. Two external
units can be controlled by this product. When
two external units are connected, the alloca-
tion of them to external unit 1 or external unit
2 is automatically set by the product.
❒ When this product’s blue lead is connected to
the vehicle’s auto-antenna relay control termi-
nal with the “AUTO ANTENNA” is set to
“SOURCE”, the vehicle’s antenna extends
while this system’s source is turned on. To
retract the antenna, turn the source off.
➲ “AUTO ANTENNA” ➞ Operation Manual
Adjusting the Volume
• Use the VOL (+/–) button to adjust the
audio sound level.
With this product, press the VOL (+/–) but-
ton to increase or decrease the volume.
❒ To adjust the navigation volume, go to the
navigation menu.
➲ Navigation volume adjustment ➞ Opera-
tion Manual
Turning the Source Off
• Press the SRC button and hold until the
source turns off.
❒ This product can be switched off by turn-
ing the ACC (ignition) OFF.