Filter
Top Products
14
Chapter 1How to Use Navigation System and Names of the Parts
Inserting/Ejecting a Disc
• Do not use with the LCD panel left open. If
LCD panel is left open, it may result in
injury in the event of an accident.
• Do not open and close the LCD panel with
hands by force. This may cause malfunc-
tion.
• When opening, closing and adjusting the
angle of the LCD panel, be careful not to
get your finger caught.
The LCD panel will be closed automatically with
the turning of the ignition switch.
Inserting a CD
1 Press the OPEN/CLOSE button.
The LCD panel opens halfway, and the CD
loading slot appears.
❒ To close the LCD panel, press the OPEN/
CLOSE button again.
2 Insert a CD into the CD loading slot.
If you insert a CD, the LCD panel closes auto-
matically, and then format reading will start.
❒ Make sure the CD loading slot is empty
before inserting a CD into the slot.
❒ When a disc is already loaded in the CD
loading slot, select the CD source by press-
ing the SRC button.
❒ You can use the AV button to switch between
navigation map displays and audio operation
displays.
❒ The built-in CD drive plays one, standard, 12-
cm or 8-cm (single) disc at a time. Do not use
an adapter when playing 8-cm discs.
❒ Do not insert anything other than a disc into
the CD loading slot.
➲ Playable discs ➞ Page 6
❒ If you cannot insert a disc completely or if a
inserted disc is not recognized, check that the
label side of the disc is up. Press the CD
EJECT button to eject the disc, and check the
disc for damage before inserting the disc
again.
❒ If the built-in CD drive does not operate prop-
erly, an error message such as ERROR-11
may be displayed.
➲ Error messages ➞ Operation Manual
Ejecting a CD
1 Press the OPEN/CLOSE button.
The LCD panel opens halfway.
2 Press the CD EJECT button.
The CD is ejected.
3 Press the OPEN/CLOSE button.
The LCD panel closes.
CD EJECT button
CD loading slot