Planar LA1950RTS Car Video System User Manual


 
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the following. If the problem
persists, please contact your local dealer or our service center.
Problem: No image appears on screen.
Check that all the I/O and power connectors are correctly and well connected
described in the "Installation" section.
Make sure the pins of the connectors are not crooked or broken.
Problem: Partial Image or incorrectly displayed image.
Check to see if the resolution of your computer is higher than that of the LCD
display.
Recon gure the resolution of your computer to make it less than or equal to
1280 x 1024.
Problem: Image has vertical ickering line bars.
Use "HORIZONTAL SIZE" to make an adjustment.
Check and recon gure the display mode of the vertical refresh rate of your
graphic card to make it compatible with the LCD display.
Problem: Image is unstable and ickering
Use "FINE" to make an adjustment.
Problem: Image is scrolling
Check and make sure the VGA signal cable (or adapter) is securely connected.
Check and recon gure the display mode of the vertical refresh rate of your
graphics card to make it compatible with the LCD display.
Problem: Vague image (characters and graphics)
Use “HORIZONTAL SIZE” to make an adjustment. If this problem still exists,
use “FINE” to make an adjustment.
14