Filter
Top Products
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A) 11
Step 1 - Mounting the Monitor
The back and sides of the monitor include mounting points that you can use to
mount the monitor as your installation requires.
Mounting holes on the LX0801PTI, LX1201PTI and LX1501PTI allow the monitor
to be mounted :
Front mounted using corner mounting holes (1)•
Rear mounted using either VESA, 3 hole RAM style, or edge •
mounting holes (2, 3)
Side mounted using variegated bosses (4)•
1
2
3
4
Removing Bezel:
If you are fl ange mounting the monitor, it •
will be necessary to remove the decorative
bezel from the enclosure. As shown, insert a
narrow straight blade screw driver between
the bezel and enclosure near one of the
friction points. Pry upwards gently.
Mounting Details LX0801PTI LX1201PTI LX1501PTI
Front
Non-Tapped Holes in Flange Clearance for M4 n/a 4 Holes 6 Holes
Rear
VESA 4 Hole Pattern Accepts M4 x .07 up to 8mm depth 75mm 100mm 100mm
3 Hole RAM Mount Style
(Addendum G)
Accepts M4 x .07 up to 8mm depth (0.91 radius, 120°) n/a n/a
Edge of Rear Casting Accepts M4 x .07 up to 8mm depth n/a 8 Holes 4 Holes
Side
Variegated Mounting Boss Accepts M8 x 1.25 up to 8mm depth n/a Yes n/a
NOTE: Planar does not supply fasteners.