Planar PE1700 Car Video System User Manual


 
-1 -
Introduction
The PE1700 LCD monitor has a 17-inch active matrix TFT (thin film transistor) liquid crystal
display module. It is designed for use with any Windows
®
-based PC (an adapter may be required for
the Macintosh). The monitor’s compact-sized design provides great space savings on your
computer desk.
Features
Ö Automatic configuration to the PC video settings with maximum SXGA resolution.
Ö Three control buttons plus OSD (on-screen display) for monitor settings adjustment and
configuration with ease and instant feedback.
Ö Support analog video input for direct and immediate replacement of CRT displays.
Ö A tilt feature to optimize viewing position.
Ö An anti-glare coating on the panel to reduce the reflection of ambient light.
Ö Flicker-free performance across all recommended video modes.
Ö Support for high refresh rates up to 75 Hz.
Ö VESA DDC2B Plug-and-Display compliant.
Ö A Power-saving feature that is compatible with Microsoft
®
Windows
Ö Compliance with Swedish MPR II guidelines for reduced electromagnetic emissions.
Ö TCO99: TCO model only
For Your Safety
For your safety and the protection of your monitor, follow these precautions:
Ö Use only the factory-supplied power cord that shipped with your monitor.
Ö To prevent electrical shock, do not disassemble the display. The cover should be removed only
by qualified service personnel.
Warning
To completely disconnect power from your display, you must
remove the power cord from the wall outlet and then remove
the power cable from the display.