Planar PLL2710W Car Video System User Manual


 
8
Basic Operation
Before using the LED LCD Monitor:
Connect external equipment properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the LED LCD Monitor on/off:
Press Power button on the front of LED LCD Monitor. The power LED indicator light will be blue
when the LED LCD Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the LED LCD
Monitor.
Displays main menu
1
Exits from OSD menu
Confirm the selection
2
Selects between VGA, DVI or Auto mode / Press the button for three
seconds to auto adjust the image (VGA only)
Select the desired item when in OSD menu
When not in OSD menu, directly enters Contrast/Brightness Setting menu.
Select the desired item when in OSD menu
When not in OSD menu, directly enters Preset Mode
+
Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When LED LCD Monitor is in normal mode, the “OSD Lock Out” function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1 button and the button for 3 seconds to lock the OSD buttons.
The LED LCD Monitor will show an “Locking OSD” message for 5-10 seconds and the message
will disappear automatically.
Repeat this step to unlock.