![](http://pdfasset.owneriq.net/6/2a/62a6bd3c-c123-4df4-8a68-a9edbfe6e8b2/62a6bd3c-c123-4df4-8a68-a9edbfe6e8b2-bg9.png)
7
Quick Installation
1.
Connect either VGA or DVI Source from the monitor to the computer. Make sure both
monitor and computer are powered OFF.
2. Connect power cord to a properly grounded AC outlet, and then to the monitor.
3. Power-ON computer and then POWER-ON the monitor.
4. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x
1080 @ 60Hz.
Figure 1:
Power cable
VGA cable
PC
DVI cable