Filter
Top Products
5
9. If vehicle is equipped with an electronic
compass, unsnap the wire harness clip and relocate
toward center of vehicle. See Figure 7.
10. Remove and retain the (2) two door scuff
plates on driver’s side. See Figure 8.
11. Remove and retain the handle which mounts to the
top of the “B” pillar. See Figure 9.
12. Unsnap the cover from upper and lower mounting
bracket for the seat belt. Remove and retain TORX
head bolt and bracket. Carefully pull panel away from
side of vehicle. Unsnap upper door trim from
headliner and lay aside. See Figure 9.
FIGURE 7
FIGURE 8
FIGURE 9