Filter
Top Products
Page- 19
Menu
entry
Function
TV Type
This setting enables the selection of the appropriate TV standard. PAL is the
customary standard in Europe. NTSC is the customary standard in the US and
Japan. Only select the MULTI option if your TV can play back both formats. Here the
output signal is automatically adjusted to the standard of the inserted DVD. If the
“MULTI” setting is selected, “AUTO” will be displayed to the left of the selection
menu.
Audio
This enables the selection of the desired dubbed language. If the language selected
here is not available on the inserted data carrier, the first language that is found will
be played back.
Subtitle
This enables the selection of the desired subtitles. If the subtitles selected here are
not available on the inserted data carrier, the first subtitles that are found will be
played back.
Disc
Menu
This enables the selection of the desired menu language. If the language selected
here is not available on the inserted data carrier, the first language that is found will
be played back
Parental
This serves to set the desired age rating.
1) Child = Kid safe
2) G = some guidance advisable
3) PG = Parental guidance suggested, some
material may not be suitable for children
4) PG 13 = Parents strongly cautioned, some
material may be inappropriate for children under
13
5) PGR = Restricted, under 17 requires
accompanying parent or adult guardian
6) R = Restricted viewing
7 ) NC17 = No one 17 and under admitted
8) 18 or older = for Adult Entertainment or X
rated movies and NO PARRENTAL is for
General Audiences (All Ages).
After setting the age rating, you
will be prompted to enter a
password. The factory default
password is set to 1369. Enter
this through the number buttons
on the remote control. Now
select “YES” or “NO” with the
arrow buttons. Then confirm your
selection with the "ENTER"
button.
Password
This function serves to protect the selected settings. The factory default password is
1369.
Default This function resets the DVD device settings to the factory default settings.
Note: If you have forgotten your changed password, you can set a new one at any time by entering
the factory default password 1369..
Factory default settings (“RESET“)
By using the reset function, the device can be changed back to the factory default settings. To use
the reset function, please press the button REL on the device. Now the operating unit can be
carefully detached towards the front and left. Now press the RESET button on the device with a thin,
sharp object. The device will then be reset and turned off if required.
Note:
When the factory settings are restored, the clock and the stored radio stations will also be reset